Portwest PW98 - Vented for Extra Air-Flow
EN 397 -30 Degrees/ + 50 Degree, LD /EN 352-3 / EN 1731 F
Professional Combi kit, containing: - Vented ABS safety helmet with wheel ratchet, adjustable size 56-63cm cm (PS55). - High performances ear muffs in ABS material, adjustable in height for better fit (PW47). - Reinforced visor holder and mesh visor (PS58).
: ABS Helmet, Mesh Visor, ABS/Polystyrene Ear Protector.
Product Technical Information
EN 397:2012Mandatory Tests:
- Impact*: Energy spread to the head form must not exceed 5kN after the fall of an object of 5 kg at 1m high.
- Penetration*: The tip of the test mass used (3 kg from 1m height) must not come into contact with the skull.
- Flammability: The helmet is exposed to a flame and it must not burn with flame emission more than 5 seconds after removal of the flame.
- Impact and Penetration tests* are performed room temperature, at +50 degrees and at -10 degrees.
Optional Tests:
- Resistance at extreme temperatures: testing impact and penetration are performed at +150 degrees, at -20 degrees or -30 degrees temperatures.
- Electrical properties: Protects against a short accidental contact with electric leads under voltage up to 440 Vac.
- Lateral deformation: Protects against lateral compressions. The maximum deformation of the helmet should be less or equal to 40mm (LD)
- Molten metal splashes: The helmet is not deformed or penetrated by splashes of molten metal (MM)
EN352:2002
EN 352-1: 2002 – Hearing – Ear Muffs
EN 352-2: 2002 – Ear Plugs
EN 352-3: 2002 – Helmet Mounted Ear Muffs
EN 352-4: 2002 – Earmuffs with Entertainment Radio
All these Standards establish requirement with regards to the manufacture, design, performances and test methods.
EN 1731 2006 – Personal Eye Protection. Mesh Eye and Face Protector.
Material specifications, design, performance and test methods for eye and face mesh protection for professional use.