Portwest PG54 -Vented for Extra Air-Flow - Glows in the Dark
EN 397 +50 degrees/-30 degrees; MM, LD, 440V / EN 50365 CLASS:0
Endurance helmet with 6 points textile harness and wheel ratchet adjustable size 56-63cm. The ABS shell is made with special photo-luminescent additive colour, that accumulates the light in well lit places and release the shining effect in very low or no light conditions – i.e. it glows in the dark. Sold with 4 points chin strap included.
: ABS - Adjustable 56-63cm, 472g
 
Product Technical Information
EN 397:2012Mandatory Tests:
- Impact*: Energy spread to the head form must not exceed 5kN after the fall of an object of 5 kg at 1m high.
- Penetration*: The tip of the test mass used (3 kg from 1m height) must not come into contact with the skull.
- Flammability: The helmet is exposed to a flame and it must not burn with flame emission more than 5 seconds after removal of the flame.
- Impact and Penetration tests* are performed room temperature, at +50 degrees and at -10 degrees.
Optional Tests:
- Resistance at extreme temperatures: testing impact and penetration are performed at +150 degrees, at -20 degrees or -30 degrees temperatures.
- Electrical properties: Protects against a short accidental contact with electric leads under voltage up to 440 Vac.
- Lateral deformation: Protects against lateral compressions. The maximum deformation of the helmet should be less or equal to 40mm (LD)
- Molten metal splashes: The helmet is not deformed or penetrated by splashes of molten metal (MM)
EN 50365: 2002 – Insulating helmets for use on low voltage installations
This standard is for helmets used for working live or close to live parts on installations not exceeding 1000 V a.c or 1500 V d.c. Testing to EN 50365 exceeds testing under EN397 for electrical properties.
Marking: double triangle + class + batch number.
